WS8101. Генератор сигналов
Версия для печати
- Общие данные WS8101
- Технические характеристики WS8101
- Комплектность WS8101
- Дополнительные материалы
- Примечание
Общие данные WS8101
Генератор сигналов специальной формы WS8101 от компании Tabor Electronics представляет собой простой в использовании и высокопроизводительный генератор импульсов. Это компактный и автономный прибор, который отлично подходит как для обучения, так и для использования в промышленных целях. Устройства Tabor Electronics протестированы и готовы к эксплуатации на протяжении долгих лет. Высокая функциональность делает генератор сигналов WS8101 универсальным и подходит как продвинутым пользователям, так и новичкам.
Технические характеристики WS8101
| Количество каналов | 1 |
| Частотный диапазон ОТ | 1 мГц |
| Частотный диапазон ДО | 100 МГц |
| Опорный генератор (погрешность установки частоты) | ±1×10-6 |
| Выходной уровень (минимум) | 16 мВпик-пик |
| Выходной уровень (максимум) | 16 Впик-пик |
| Выходной импеданс (Ом) | 50 |
| ЦАП (бит) | 16 |
| Память (СПФ) | 512 кБ |
| Виды модуляции | АМ | ЧМ | АМн | ЧМн | ФМн |
| ГКЧ | Да |
| BURST Пакетный режим | Да |
| Экран (см, разрешение) | ЖК | 9,6 см |
| Интерфейс | USB | LAN | GPIB |
| CONFIGURATION | Output Channels 1 or 2, semi-independent |
| STANDARD WAVEFORMS | Waveforms: Sine, Triangle, Square, Pulse, Ramp, Sine(x)/x, Gaussian, Exponential, Repetitive Noise, DC.
Frequency Range: Sine 1µHz to 100MHz Square 1µHz to 62.5MHz All Others 1µHz to 31.25MHz |
| SINE | Start Phase: 0-360°
Phase Resolution: 0.01°
Harmonics Distortion (1Vp-p):
1MHz to 5MHz <-60dBc 5MHz to 10MHz <-57dBc 10MHz to 25MHz <-55dBc 25MHz to 50MHz <-50dBc 50MHz to 100MHz <-45dBc Non-Harmonic Distortion (1Vp-p): 1MHz to 25MHz <-70dBc 25MHz to 50MHz <-65dBc 50MHz to 100MHz <-60dBc Total Harmonic Distortion: DC to 100kHz 0.1% Flatness (1MHz, 1Vp-p): 1MHz to 25MHz <0.5dBc 25MHz to 50MHz <1dB 50MHz to 100MHz <2dB SSB Phase Noise (10kHz offset): 1MHz <-115dBc 10MHz <-100dBc 100MHz <-80dBc |
| TRIANGLE | Start Phase: 0-360° Phase Resolution: 0.01° |
| SQUARE | Duty Cycle Range:0% to 99.9%
Resolution: 0.1% Rise/Fall Time: <5ns (<4ns typ.) Overshoot (typ.): <5% Jitter (rms): <100ps |
| RAMP | Timing Ranges: 0%-99.9% of period |
| SINC (Sine(x)/x) | “0 Crossings”: 4-100 |
| GAUSSIAN | Time Constant: 10-200 |
| EXPONENTIAL PULSE | Type: Rise or Decay, selectable
Time Constant: -100 to 100 |
| REPETITIVE NOISE | Type: Repetitive Bandwidth: 31.25MHz |
| DC | Range: -8V to 8V |
| PULSE | Pulse Mode: Single or double, programmable
Polarity: Normal, inverted or complement Period: 16ns to 1000s Resolution: 4ns Pulse Width: 8ns to 1000s Resolution 4ns Accuracy <2% (typ.) Rise/Fall Time: Fast <4ns (typ.) Linear 4ns to 1000s High Time, Delay & Double Pulse Delay: 4ns to 1000s Impedance: 50Ω Amplitude Window: 16mVp-p to 16Vp-p(1) Low Level -8V to +7.992V (1) High Level -7.992V to +8V (1) (1) Double into high impedance NOTES: 1. All pulse parameters, except rise and fall times, may be freely programmed within the selected pulse period provided that the ratio between the period and the smallest incremental unit does not exceed the ratio of 512,000 to 1, hence the specifications above do not show maximum limit as each must be computed from the above relationship. 2. Rise and fall times, may be freely programmed provided that the ratio between the rise/fall time and the smallest incremental unit does not exceed the ratio of 100,000 to 1. 3. The sum of all pulse parameters must not exceed the pulse period setting |
| ARBITRARY WAVEFORMS | Sample Rate: 1.5S/s to 250MS/s
Vertical Resolution:16 bits Waveform Memory:512k points Min. Segment Size:16 points Resolution: 4 points No. of Segments: 1 to 1k Waveform Granularity: 1 point |
| MODULATION | Carrier Waveform: Sine wave
Carrier Frequency: 1µHz to 100MHz Source: Internal |
| AM | Envelope Waveform:Sine, square, triangle, ramp
Envelope Freq.: 1mHz to 100kHz Modulation Depth: 0% to 100>#/td### |
| FM | Modulating Shape: Sine, square, triangle, ramp
Modulating Freq.: 1µHz to 100kHz Peak Deviation: Up to 100MHz |
| ASK / FSK / PSK | Baud Rate: 1bits/sec to 10Mbits/sec
Data Bits Length: 2 to 4,000 |
| SWEEP | Sweep Step: Linear or log
Sweep Direction: Up or Down Sweep Time: 1µs to 500s |
| COMMON CHARACTERISTICS FREQUENCY |
Resolution: Display 11 digits (limited by 1µHz)
Remote 14 digits (limited by 1µHz) Accuracy/Stability: Same as reference |
| ACCURACY REFERENCE CLOCK | Internal 0.0001% (1 ppm TCXO) 1ppm/year aging rate External 10MHz TTL, 50% ±2% or 50Ω ±5% 0dBm |
| AMPLITUDE | Range: 10mV to 16Vp-p into 50Ω;
Double into open circuit
Resolution: 4 digits
Accuracy (1kHz): ±(1% + 50mV) Rise/Fall Time: <4ns, typ. Overshoot: 5%, typ. OFFSET Range: 0 to ±7.992V, into 50Ω Resolution: 1mV Accuracy: ±(1%+1% of Amplitude +5mV) |
| OUTPUTS | Connector: Front panel BNC
Type: Single-ended Impedance: 50Ω ±1% Protection: Short Circuit to Ground, 10s max |
| INPUTS TRIGGER INPUT | Connector: Rear panel BNC
Impedance: 10kΩ
Slope: Positive / Negative (selectable)
Damage Level: ±12V
Input Frequency: DC to 2.5MHz
Level: -5V to 5V
Sensitivity: 100mV
Min. Pulse Width: 10ns |
| FILTERS | Type: 25MHz, 50MHz, 60MHz, 120MHz |
| RUN MODES | Continuous: Free-run output of a waveform.
Triggered: Upon trigger, outputs one waveform cycle. Last cycle always completed. Gated: External signal transition enables or disables generator output. Last cycle always completed Burst: Upon trigger, outputs a Dual or multiple pre-programmed number of waveform cycles from 1 through 1M. |
| EXTERNAL | Source: Common
Source: Rear panel BNC Slope: Positive/Negative, selectable Damage Level: ±12V Input Frequency: DC to 2.5MHz Trigger Level: -5V to 5V Resolution: 1mV Sensitivity: 100mV Min. Pulse Width: 10ns System Delay: 6 SCLK + 150ns Trigger Jitter: ±1 SCLK period |
| GENERAL | Voltage Range: 85 to 265VAC, 48-63 Hz
Power Consumption: 60W Display Type: Reflective Color LCD, back-lit Size 3.8” Resolution 320 x 240 pixels Interfaces: USB 1 x rear, USB device, (A type) LAN 100/10 BASE-T GPIB IEEE-488.2 - SCPI – 1993.0 Dimensions: With Feet 212 x 102 x 415 mm (WxHxD) Without Feet 212 x 88 x 415 mm (WxHxD) Weight: Without Package 3.5 kg Shipping Weight 4 kg Temperature: Operating 0°C - 50°C Storage -40°C to + 70°C. Humidity: 11°C - 30°C 85% 31°C - 40°C 75% 41°C - 50°C 45% Safety: CE Marked, IEC61010-1 Calibration: 1 year Warranty (1): 3 years standard |